| |
Subject |
Author |
Date Posted |
Forum
|
 |
RE: Heating element?
Replacing Water Heater Element on Atwood GC10A-4E Water Heater
|
shastagary
|
07/22/23 12:04pm |
Class A Motorhomes
|
|
RE: Wi-Fi, Blue tooth antenna question.
the plastic caps are to insulate the wires from touching any bare metal in the dash. the parking brake wire should connect to the switch on the parking brake so the driver cannot watch video when the vehicle is moving. the wifi and bluetooth wires are antennas just as they are.
this picture on the amazon page shows the wiring it will also be in the instruction manual wiring diagram
|
shastagary
|
07/17/23 11:02am |
Tech Issues
|
|
RE: adding on/off toggle switch
never put a switch on the ground wire on automotive audio video equipment as you can damage the system by it seeking a ground path through its auxiliary output or input rca connectors or other equipment connected to it.
already happened to me by connecting the +12v power wire before the ground wire when i had already connected the rca output cables to downstream components that caused a surface mount audio ground fuse to blow by trying to power the head unit through it.
the head unit then had no audio ground and had to be repaired to work right again.
|
shastagary
|
06/12/23 11:05am |
Tech Issues
|
|
RE: 2004 Viking 1706LS popup camper, uneven roof lift (HELP!)
if you read the posts here it may help you identify the system you have
it does not look like there is much adjustment in these systems there held up with springs pulled with cables the springs could weaken over time
I think '05 was the last year where Viking used the IDT lift system
|
shastagary
|
06/08/23 11:13am |
Tech Issues
|
|
RE: 2004 Viking 1706LS popup camper, uneven roof lift (HELP!)
a search like this comes up with a lot of results can you find what you need here? viking pop up camper roof lift
or this see the recall viking pop up camper lift system diagram
|
shastagary
|
06/08/23 10:00am |
Tech Issues
|
